ASSEMBLY INSTRUCTION COASTER FINE FURNITURE Page 1 of 3 2014/10/9
ASSEMBLY INSTRUCTION A B TOP GLASS 1PC LEG CONNECTOR 1PC C LEG 3PCS SMALL BOLT 3PCS LARGE BOLT 3PCS CAP 3PCS ROUND CAP 2PCS ALLEN WRENCH 1PC www.coasterco mpany.
ASSEMBLY INSTRUCTION STEP 1 4 2 B 2 C 3 2 4 3 C 3 You will need one people for this installation. And will take about twenty minutes. STEP 1 : 1. Insert Cap (3) into the hole at Leg (C). Insert Round Cap (4) into the hole at Leg Connector (B). 2.Attach Leg (C) to Leg Connector (B) by using Large Bolt (2) tighten with allen wrench. 3.Repeat for the remaining Suppor Leg (C). STEP 2 1 1 A 1 STEP 2 : 1.
