901235 3 PC LAMP SET ASSEMBLY INSTRUCTION COASTER FINE FURNITURE www.coastercompany.
ITEM:901235 ASSEMBLY INSTRUCTIONS PARTS IDENTIFICATION E. Finial H. Finial D. Shade G. Shade C. Harp F. Harp B. Socket Section E. Decoration Section D. C. B. Center Pipe A. Lamp Body A. Base NOTE: QUANTITES SHOWN ARE FOR THREE LAMPS Assembly time 40 minutes. 1 person needed. Page 2 of 4 WWW.COASTERCOMPANY.
ITEM:901235 ASSEMBLY INSTRUCTIONS TABLE LAMP Assembly Instruction 1. Carefully unpack and lay out all parts on smooth surface. 2. Screw Socket Section(B) into Lamp Body(A), pull the cord through the base. 3. Insert Harp(C) into the saddle of Socket Section(B). 4. Place Shade(D) onto Harp(C), tighten by Finial(E) and make the shade keep horizontal. Use 3-Way 100W (Maximum) Type A Bulb(Bulb not included) Page 3 of 4 WWW.COASTERCOMPANY.
ITEM:901235 ASSEMBLY INSTRUCTIONS FLOOR LAMP Assembly Instruction 1. Carefully unpack and lay out all parts on smooth surface. 2. Screw Center Pipe(B) into the Base(A), then screw Center Pipe(C), Center Pipe(D), Decoration Section(E) to each other one by one, pull the cord through the base. 3. Insert Harp(F) into the saddle of Decoration Section(E). 4. Place Shade(G) onto Harp(F), tighten by Finial(H) and make the shade keep horizontal.
