ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE Fine Furniture for every stage of life 881281(B1&B2) Executive Desk REVISION 0 : 07/07/2020 PAGE 1 OF 7 COASTERFURNITURE.
ITEM: 881281(B1&B2) ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediatelly. 2. This product is for home use only and not intended for commercial establishments.
ITEM: 881281(B1&B2) ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediatelly. 2. This product is for home use only and not intended for commercial establishments.
ITEM: 881281(B1&B2) ASSEMBLY INSTRUCTIONS STEP 1 B PART # E ~ I INSIDE STEP 2 5 2 B & C 3 6 4 E B & C PAGE 4 OF 7 COASTERFURNITURE.
ITEM: 881281(B1&B2) B D ASSEMBLY INSTRUCTIONS STEP 3 B D 4 5 3 1 C STEP 4 REMOVE DRAWER, BEFORE ATTACHING THE TOP UP DOWN PAGE 5 OF 7 COASTERFURNITURE.
ITEM: 881281(B1&B2) ASSEMBLY INSTRUCTIONS STEP 5 A D A 4 7 3 1 5 4 3 1 5 B STEP 6 PUT DRAWERS BACK PAGE 6 OF 7 COASTERFURNITURE.
ITEM: 881281(B1&B2) ASSEMBLY INSTRUCTIONS STEP 7 H G F I STEP 8 COMPLETE LEVELER PAGE 7 OF 7 COASTERFURNITURE.
ITEM: 881281(B1&B2) INNER SIZE OF DRAWER (A) : 14.4”W x 17.8”D x 1.8”H INNER SIZE OF DRAWER (B) : 14.4”W x 17.8”D x 3”H INNER SIZE OF DRAWER (C) : 14.4”W x 17.8”D x 9.6”H INNER SIZE OF DRAWER (D) : 24.9”W x 10.7”D x 1.8”H 39” 72” 16.4” 31” 2.8” 4.9” 11” A B C 27” 4.3” D 16.4” 2.8” 3.7” 4.9” 16” 22.1” 11” A B C 27.1” 16” 29.3” 35.4” 22.1” NOTE: Dimension tolerance + - 5% COASTERFURNITURE.