Assembly Guide

ITEM:724165
ASSEMBLY INSTRUCTION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME PER UNIT
5 MINUTES
Z HARDWARE IDENTIFICATION
ATTENTION:Anti tipping
safeguard, Please install the Anti
tipping hardware as shown in the
drawing this can help to prevent
any tipping issues.
NO. DESCRIPTION FIGURE SIZE QTY
1 PLUG 2PC
2 LARGE SCREW Ø8×2" 1PC
3 TIGHTWIRE 280mm 1PC
4 SHORT SCREW Ø8×3/4" 1PC
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protection against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may
result in injury and damage.
PAGE 2 OF 3
COASTERFURNITURE.COM