Assembly Guide

723367
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
30 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1 GLUE 15g
1 PC
2
WOODEN DOWEL
Ø8x30mm
14 PCS
3
CAM BOLT
Ø7x35.5mm SR
4 PCS
4
CAM LOCK
Ø15x12mm SR
4 PCS
NO DESCRIPTION FIGURE Q’TY
5
SCREW
Ø4.5x42mm SR
6 PCS
6
SCREW
Ø5x19mm BLK
16 PCS
7 PLASTIC FEET 4 PCS
8
STICKER
Ø20mm
1 PC
A SIDE PANEL
2 PCS
B BOTTOM PANEL
1 PC
C TOP PANEL
1 PC
D BACK PANEL
1 PC
E LEG
4 PCS