Manualshelf

Assembly Guide

ManualsBrandsCoaster ManualsHome Furnishing16" Sofa Table with X-Design Metal Brace, Bottom Shelves and Plumbing Tubing Frame in Rustic Oak Color
12345
705949
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 5
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
30 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Z
A TOP 1 PC
B SHELF 1 PC
C LEG FRAME
2 PCS
D SUPPORT BAR 1 PC
HARDWARE IDENTIFICATION
NO DESCRIPTION FIGURE Q’TY
1
SHORT SCREW
Ø5x23mm BLK
8 PCS
2
LONG SCREW
Ø4.5x42mm BLK
4 PCS
3
BOLT
M6x15mm BLK
4 PCS
4
ALLEN WRENCH
4mm SR
1 PC