ITEM: 701973 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS : 1.Remove hardware from box and sort by size. 2 Please check to see that all hardware and parts are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warming ! 1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.
ITEM: 701973 ASSEMBLY INSTRUCTION It needs two persons and takes about forty minutes to assemble the item. @ @ STEP 1 : Insert Wooden dowel (2) into the holes on the two sides of Left 4 side panel (A), Right side penal (B), Upper divider panel {C), and Lower divider pane! (D) Insert and screw Cam bolts (3) into the x12 holes on Left side panel (A), and Upper divider panel (B). ta Use Screws (9) attach Rail (8-CL) on Left side panel (A), and CR Lower divider panel (D).
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 2 : Insert Rubber (12) into the holes of Upper back panel (H). Insert and screw Cam bolts (3) into the holes on the Top panel (G), and Cross panel (F). Insert Wooden dowel (2) into the holes on the two sides of Cross panel (F). @ x3 Section HK 2 Apply gi || wooden dowels k ’ ) Eom |p C ORATE R page 5 of 11 www.coastercompany.
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 3 : Connect Upper divider panel (C) and Right side panel (B) with Top panel (G). When Cam bolts is attached, insert Cam locks (4) and tighten with screw driver (NOT INCLUDED). Cover Cam locks (4) with wood colored stickers (15). ‘Apply glue on all wooden dowels to ensure integrity of the structure. STEP 4 : Insert Upper back panel (H) along the slots of Top panel (G). COASTER.
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 5 : Connect Cross panel {F) with Right side panel (B) along the slots of Upper back panel (H). J Sl ‘Apply glue on all wooden dowels to ensure integrity of the structure STEP 6 : Insert and screw Cam bolt (3) into the holes on the Cross = oda Insert Cam locks (4) to the Cross panel (F), and tighten with screw driver (NOT INCLUDED). 1 Cover Cam locks (4) with wood colored stickers (15). 5 COASTER.
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 7 : Connect Left side panel (A) and Lower divider panel (D) with the assemble piece from (STEPS). Insert Cam locks (4) to the Cross panel (F), and tighten with screw driver (NOT INCLUDED). Cover Cam locks (4) with wood colored stickers (15). Se . 15 ‘Apply glue an all wooden dowels to ensure integrity of the structure. STEP 8 : Insert Lower back panel (I) along the slots of Upper back panel (H).
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 9 : Connect Cross bar (Q) and Foot (R), using Bolts and 13 12 tighten with Allen wrench (14). ~& x4 STEP 10 : Connect the assembled piece from (STEP) onto the assemble piece from (STEP 8), using Bolts and tighten >A 5 with Allen wrench (14). COASTER.
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 11 : Insert and screw Long screws (7) into the holes on the assemble piece x4 from ( STEPPE. STEP 12 : Insert and screw Cam bolts (3) into the holes on the Right drawer front panel (0), and Left drawer front panel (J). Insert Wooden dowels (2) into the holes on the one side of Left drawer side panel (L), and Right drawer side panel (M).
ITEM: 701973 ASSEMBLY INSTRUCTION STEP 13 : Fasten Handles (10) on the Left/Right drawer side panel with Handle bolt (11). Attach All (8-FL) at bottom of Left drawer side panel (L) and All (8-DR) at bottom of Right drawer side panel (M) with Short screws (9). STEP 14 : Place drawers into the TV stand. FINISH COASTER.
