ITEM: 700841 ASSEMBLY INSTRUCTION Assembly Instruction ASSEMBLY TIPS: 1, Remove hardware from box and sort by size. 2,Please check to see that all hardware end parts are present prior to start of assembly, 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly A nerving ! 1.Don’t attempt to repair or modify parts are broken or defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ITEM: 700841 ASSEMBLY INSTRUCTION HARDWARE LIST: NO. DESCRIPTION FIGURE QTY 1 BOLT eT PCS 2 BOLT CAP PCS 3 28430 WOOD PLUG PCS 4 Marmara SCREW PCS § W435 SCREW PCS 6 SLIDE RAIL PCS 7 SCREW PCS 8 SHELF PIN SET STEP 1:Separate the slide rail (6)into two part. STEP 2:Attach face board of drawer the side board of drawer wring bolt(l), bolt cap (2) and wood plug (3).
ITEM: 700841 ASSEMBLY INSTRUCTION STEP B:Lock other part of slide tall aa the side board using screw (7). STEP 6:Lock other part of slide rail om the middle board screw (7). STEP 7:Attach right side board(D) and right middle (0D board through wood rag bolt (1), bolt cap(2) and wood plug (3). STEP 8:Attach loft dido board (F) aad left airlock board through wood rung (Dowsing bolt cap(l) and wood pledge. STEP 9:Lock leg (I) to the base board, using screw “. COASTER. rte Page 4 www. coaster company .
ITEM: 700841 ASSEMBLY INSTRUCTION STEP 10:After stop 7 and 8, Lock the board (DEMODE to the base board, using cap(2) asd wood plug(). STEP 11:Put the back board (C) to the back of TV stand directly and lock top board through board MEM EE EA, slag bolt (1), bolt cap (2) sad wood plug(s). Le | CORRECTER. Page 5 of 6 www. coaster company .
ASSEMBLY INSTRUCTION ITEM: 700841 STEP 12:Put the drawer into the TV stand. TON EK STEP 13:Put the shelf piss (S)to the holes on the board (G) and (0) to support the glass. CORRECTER.
