| TEM: 700825 ASSEMBLY INSTRUCTION Assembly Instruction ASSEMBLY TIPS: 1, Remove hardware from box and sort by size. 2,Please check to see that all hardware end parts are present prior to start of assembly, 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly A nerving ! 1.Don’t attempt to repair or modify parts are broken or defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
| TEM: 700825 ASSEMBLY INSTRUCTION HARDWARE LIST: NO. DESCRIPTION FIGURE QTY 1 BOLT eT PCS 2 BOLT CAP PCS 3 28430 WOOD PLUG PCS 4 Marmara SCREW PCS § W435 SCREW PCS 6 SLIDE RAIL PCS 7 SCREW PCS 8 SHELF PIN << ~ SET STEP 1:Separate the slide rail (6)into two part. STEP 2:Attach face board of drawer the side board of drawer using bolt (1), bolt cap (2) and wood plug (3). Then place base board of drawer (P) to board E,L,N,M directly.
| TEM: 700825 ASSEMBLY INSTRUCTION STEP 5:Lock other part of slide rail on the side | STEP 6:Lock other part of slide rail on the middle board using screw (7). board using screw (7). STEP 7:Attach right side board(E) and right middle| STEP B:Attach left side board (F) and left (0) board through wood rung bolt (1), middle board (6) through wood rung bolt bicep) and wood plug (3). bolt cap(2) and wood plug (3). COASTER. www. coaster company .
| TEM: 700825 ASSEMBLY INSTRUCTION STEP 10:After step 7 and 8, Lock the board to the base board, using bolt (1), bolt cap(2) and wood plug(3). STEP 11:Put the back board(C) to the back of TV stand directly and lock top board through board & (6) using bolt (1}, bolt cap (2) and wood plug (3). COASTER. rte Page 5 of 6 www. coaster company .
| TEM: 700825 ASSEMBLY INSTRUCTION STEP 12:Put the drawer into the TY stand. STEP 14 www. coaster company . com COASTER.
