Assembly Guide

ITEM:
609452
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
ASSEMBLY TIME
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
20 MINUTES
PAGE 2 OF 6
WARNING!
2. This product is for home use only and not intended for commercial establishments.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
A
BACK FRAME
1PC
E
ROCKER
2PCS
B
C
UPPER SIDE
STRETCHER
2PCS
LOWER SIDE
D FRONT LEG FRAME
2PCS
1PC
F
G
H
SEAT
LEFT ARMREST
RIGHT ARMREST
1PC
1PC
1PC
HARDWARE IDENTIFICATION
2
4PCS
4
GLUE
1PC
GLUE
PAN HEAD SCREW 2
(4x50mm - RBW)
STRETCHER
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
1
2PCS
PAN HEAD SCREW 3
(5x50mm
- RBW
)
3
14PCS
PAN HEAD SCREW 1
(4x35mm - RBW)