COASTER. 460279 FINE FURNITURE GIRLS TENT BED WITH SLIDE ASSEMBLY INSTRUCTION COASTER FINE FURNITURE = www.coastercompany.
ITEM:460279 ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior start of assembly. 3. Please folio attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning ! 1. Don't attempt to repair modify parts that are broken or defective . Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ITEM:460279 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size, 2. Please check to see that all hardware and parts are present prior start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning | 1. Don’t attempt to repair modify parts that are broken or defective , Please contact the store immediately. 2.
ITEM:460279 ASSEMBLY INSTRUCTION ASSEMBLY ne Do not fully tighten all bolts until assembly Is complete, 1 Gan PCS This will help all parts to assemble properly. S will help all pa properly 10 CAPS STEP 1: Assemble the bed frame to left panel and right 1“ oL panel. STEP 2:Assemble the back guardrail to the left and right [ ° © PCS panel and bed frame. 7 9m PCs www.coastercompany.com COASTER.
ITEM:460279 ASSEMBLY INSTRUCTION STEP 3: Assemble the front guardrail to the front cross brace of the bed frame. STEP 4: Assemble the front and back connector tube tithe { 5 ome PCS front and back guardrails. 6 ome PCS 9 © PCS | Bh CORSET AR www.coastercompany.
ITEM:460279 ASSEMBLY INSTRUCTION Luck the screw after assembling STEP 6: Attach the ladder to the left side of the front cross brace of the bed frame. COASTER. Page 7 of 13 www.coastercempany.
ITEM:480279 ASSEMBLY INSTRUCTION STEP 7: Assemble the slide plate to the slide oblique tube. 7 gm PCS 9 PCS STEP 8: Attach the short cross brace to under the slide plate, and then attach the slide guardrail. CO SATE! A | WWW.COESIBrcompany.
ITEM:460279 ASSEMBLY INSTRUCTION STEP 9:Attach the slide to the right side of the front cross brace of the bed frame. 6 @ua PCS & PCS 11 15 | STEP 10: Assemble the castle connector tube to the slide oblique tube. www.coastercompany.com COASTER.
ITEM:460279 ASSEMBLY INSTRUCTION STEP 11: Assemble the finial to the castle arc tube. 1PC STEP 12: Attach the castle arc tube and top round 6 @mm PCS frame fo the castle connector tube. 15 FE pintos COPTER. www.coastercompany.
ITEM:460279 ASSEMBLY INSTRUCTION STEP 13: Attach the arc support tube fo the castle connector tube, and then attach the connector tube to get tent and castle frame together. 7 gm PCS 8 um PCS 15 COASTER. Page 11 of 13 www.coastercompary.
{TEM:460279 ASSEMBLY INSTRUCTION FOLLOW THE INFORMATION ON THE WARNING APPEARING ON THE UPPER BUNK END STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM BED. KEEP THESE INSTRUCTION FOR FUTURE REFERENCE. STEP 15: Assemble the tent fabric to the bed. www.coastercompany.com | COASTER.
ITEM:460279 ASSEMBLY INSTRUCTION | Safety Warnings 1.Follow the information on the warnings appearing on the upper ! bunk end structure and on the carton . Do not remove warning label | from bed, | 2.Always use the recommended size mattress or mattress support,or both,to help prevent the likelihood of entrapment or falls. surface of mattress must be at least 5 below the upper edge of guardrails . 4.Do not allow children under 6 years of age to use the upper bunk. 5.
