ITEM: 400691 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size 2. Please check to see that all hardware and parts are present prior to start of assembly. 3, Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. ‘Warming! 2. This product is for home use only and not intended for commercial establishment. 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ITEM: 400691 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size 2. Please check to see that all hardware and parts are present prior to start of assembly. 3, Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. ‘Warming! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ITEM: 400691 ASSEMBLY INSTRUCTIONS 400691 1 STEP 1 Align & fasten left (C)& right (D) headboard post to headboard bolt washer (2) & flat washer (3). DO NOT FULLY TIGHTEN AT THIS STEP . STEP 2 2.1) Align & fasten bottom rail (E) to left (C) & right (D) headboard leg using long screw (5) & fully tighten with screw driver (NOT INCLUDED). 2.2) THEN FULLY TIGHTEN ALL THE BOLTS (1) AT STEP 1 WITH ALLEN WRENCH(4).
ITEM: 400691 ASSEMBLY INSTRUCTIONS 400691 1 & BOX 2 STEP 4 4.1) Align & screw in thread bolt (6) to headboard (HB) & foot board (F) posts by turning clockwise until tight. 4.2 Align & fasten bed rail (G) to headboard (HB) & foot board (F) posts using square flat washer washer (9) & hex nut (6) and fully tighten with wrench (11). Te od 7 STEP 5 5.1) Align & fasten bed slat support with leveler (I) to bed slat (H) by turning clockwise until tight.
