oT COASTER FINE FURNITURE ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE Fine Furniture for every stage of life 315821ST FR He REVISION 08062030 PAGE 01 OF 06 COASTER FURNITURE COM
} Pan ITEM:315821T COASTER ASSEMBLY INSTRUCTIONS FINE FURNITURE ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING ! A 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.
} Pan ITEM:315821T COASTER HARDWARE IDENTIFICATION WASHER PCS ALLEN KEY acs 7 MM) 1PC 1 ibe Ow PCS 2 BOLT BOLT 3 PCS 8 WRENCH = PC BOLT NUT E&), 4 (471-314 WHT) PCs | 3 rey GY) PCS WASHER PCS 5 NOTE: Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item. its Ea COASTERFURNITURE.
ITEM:315821T ASSEMBLY INSTRUCTIONS STEP 1: ASSEMBLY { Do not fully tighten all bolts until assembly is complete. This will help all parts to assemble properly. 2 PCS 6 PCS 7 its COASTERFURNITURE.
} Pan ITEM:315821T COASTER FINE FURNITURE Note : Dimension tolerance +5% A WARNINGS: Do not remove waning label from bed. Use only mattress which is long and Do not allow horseplay or under the bed and prohibit jumping on the bed. Periodically check and ensure that all the components are in their proper position, free from damage, and that all connectors are tight. Do not use substitute parts, Contact the store for replacement part. Maximum total weight is not to exceed 400 Ibs.
