COASTER. 300261F (B1&B2) FINE FURNITURE FULL SIZE BED WITH PU ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM : 300261F (B1&B2) ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: ‘Warning! 1.Remove Hardware from Box and sort by size. 2.Please check to sec that all Hardware and Part are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. 1.Don't attempt to repair or modify parts that are broken of defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ITEM : 300261F (B1&B2) ASSEMBLY INSTRUCTIONS 300261F 1 STEP 1 STEP 2 Place headboard panel upside down on soft surface, Align and fasten headboard legs to headboard using bolt, place the headboard leg on the correct position. and lock washer ,then tighten with Allen wrench. **BACK VIEW **BACK VIEW IF PURCHASE HEADBOARD ONLY, SKIP BELOW STEPS 300261F (B1 1&BOX2 STEP 3 Align and fasten left & right foot board leg to foot board panel using bolt and tighten with small Allen wrench. COASTER. WWW.coastercompany.
ITEM : 300261F (B1&B2) ASSEMBLY INSTRUCTIONS STEP 4 Unscrew the bolt from headboard and foot board. Align and fasten bed rails to headboard and foot board using bolts and tighten with big Allen wrench . STEP 5 Align and fasten bed slat support to bed slat using bolt and tighten with small Allen wrench. STEP 6 Align and fasten bed slats to bed rails using screw and tighten with screw driver (Not included). WWW.coastercompany.
