300007FULL FULL SIZE BED ASSEMBLY INSTEUCTIONS COASTER FINE FURNITURE 1 OF 4 2014-5-8
ITEM: 300007FB1 ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. warning 1. Don't attempt to repair or modify parts that are broken or defective please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ITEM: 300007FB2 ASSEMBLY INSTRUCTION PARTS IDENTIFICATION B Wood legs 2 PCS C Bed rail 2 PCS D Footboard 1 PC E Slat 3 PCS F Support leg 3 PCS HARDWARE PACKAGE DESCRIPTION 1 Allen wrench FIGURE 5*23*67mm Q'TY 1 PC 2 Flat washer Ø5/16 * Ø16 * Ø1.5 mm 2 PCS 3 Long bolt 2 PCS 4 Headboard corner bracket - Left (facing) 1 PC 5 Headboard corner bracket - Right (facing) 1 PC 6 Footboard corner bracket 2 PCS 7 Flat washer Ø6.
IT NEEDS TWO PERSONS AND TAKES ABOUT THIRTY MINUTES TO ASSEMBLE THE ITEM. STEP 1 Attach the wooden foot(B) to the headboard(A) and footboard(D) STEP 2 Align and attach the left and right brackets (4 and 5) to the bed rails (C) using flat washer (7) bolt (8) and tighten with allen wrench (10). Then align and attach the footboard brackets (6) to the footboard (D) and bed rails (C) using flat washer (7) bolt (8) and tighten with allen wrench (10). Finally hang the bed rails (C) to the headboard (A).
