Assembly Guide

ITEM:223573
Attach a bracket securely to the back top rail of the
Locate the other bracket on the wall over a wall
furniture using short screw provided, through the
stud and two inches below the mounting bracket
smaller hole.
secured to the back of the furniture. Attach the
wall stud using the long screw provided, through the
smaller hole.
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide
STEP 3
the flat end through the locking end and draw it through until all slack is removed. Confirm that the
strap is securely laced and locked.
PAGE 4 OF 4
COASTERFURNITURE.COM
This restraint is not a subsitutefor proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1 STEP 2
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING!
Injury may result from tipping furniture.
This restraint may protection against tipping furniture.
Do not allow children to climb on furniture.