205325 CHEST ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM : 205325 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. Warning! 1. Donˊt attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ANTI - TIPPING KIT PARTS IDENTIFICATION A HARDWARE IDENTIFICATION CHEST 1PC THIS TIP RESTRAINT MUST BE ATTACHED TO A WALL STUD USING LONG SCREW ENCLOSED. STEP 1 Attach a bracket securely to the back top rail of the chest using short screw provided, through the smaller hole. 6 SHORT SCREW 1PC 7 LONG SCREW 1PC 8 CABLE TIE 1PC 9 L BRACKET 2PCS STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of chest.
