205135 CHEST ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM:205135 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly. Warning! 1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishments.
ITEM:205135 ASSEMBLY INSTRUCTIONS 4 STEP 1 STEP 2 1 2 3 B A STEP 3 COMPLETE PAGE 3 OF 4 www.coastercompany.
ANTI - TIPPING KIT PARTS IDENTIFICATION A CHEST 1 PC HARDWARE IDENTIFICATION 5 CABLE TIE 1 PC 6 L - BRACKET 2 PCS 7 PLASTIC ANCHOR 1 PC 8 LONG SCREW 1 PC 9 SHORT SCREW 1 PC 1.1 Attach one of the mounting brackets securely to the back edge of the chest.Use the short screw. 1.2 Determine where the chest is to be placed and mark location on the wall for the mounting bracket screw hole approximately 2"below the bracket mounted to the edge of the chest. 1.3 Drill a 3/16" hole in the wall.
