ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE Fine Furniture for every stage of life REVISION 0 : 06/23/2020 REVISION 1 : 07/02/2020 183405 COUNTER HEIGHT STOOL PAGE 1 OF 6 COASTERFURNITURE.
ITEM:183405 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
ITEM:183405 ASSEMBLY INSTRUCTIONS HARDWARE IDENTIFICATION 1 SHORT BOLT (1/4" x 21mm SR) 3PCS 2 MEDIUM BOLT (1/4" x 28mm SR) 10PCS 3 NUT (1/4") 3PCS 4 LEVELER (1/4" x 12mm BLK) 5PCS 5 CAP (16 x 16mm) 2PCS 6 WASHER (∅16mm) 2PCS 7 PLASTIC WASHER (∅19mm) 3PCS 8 ALLEN WRENCH (4mm) 1PC NOTE: PARTS LISTED ABOVE ARE FOR ONE STOOL PAGE 3 OF 6 7 COASTERFURNITURE.
ITEM:183405 ASSEMBLY INSTRUCTIONS STEP 1 Do not tighten until each step is completed or instructed. 2 D 2 C 2 5 STEP 2 4 4 4 4 C PAGE 4 OF 6 COASTERFURNITURE.
ITEM:183405 ASSEMBLY INSTRUCTIONS STEP 3 FIRST 7 3 3 6 1 7 6 7 3 B A STEP 4 2 2 PAGE 5 OF 6 COASTERFURNITURE.
ITEM:183405 ASSEMBLY INSTRUCTIONS Product Size : 546 X 489 X 826 H (MM) Product Size : 21.5" X 19.25" X 32.5" 52 826 mm 0(2 0.5 ") 0( 48 ") 19 365 mm 32.5" 14.25" 652 mm 25.75" 175 mm 6.75" 508 mm 20" 546 mm 489 mm 21.5" 19.25" Note : Dimension tolerance ±5% PAGE 6 OF 6 COASTERFURNITURE.
