Assembly Guide

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
15 MINUTES
PAGE 2 OF 3PAGE 2 OF 3
COASTERFURNITURE.COM
ASSEMBLY TIME
ASSEMBLY TIPS :
ASSEMBLY INSTRUCTIONS
ITEM :
110079
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
1
4
8PCS
2
3
BOLT
(Ø5/16” x 2"- BLK)
PAN HEAD SCREW
8PCS
8PCS
6PCS
SEAT
LEFT FRONT LEG
LEFT BACK LEG
RIGHT FRONT LEG
RIGHT BACK LEG
SIDE STRETCHER
CENTER STRETCHER
1PC
1PC
1PC
1PC
1PC
2PCS
1PC
A
B
C
D
E
F
G
5
ALLEN WRENCH
(6MM - BLK)
1PC
LOCK WASHER
(Ø5/16” - RBW)
FLAT WASHER
(Ø5/16” - RBW)
(Ø8 x 50MM - RBW)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Quantities shown are for one bench.