Assembly Guide

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
15 MINUTES
PAGE 2 OF 4PAGE 2 OF 4
COASTERFURNITURE.COM
ASSEMBLY TIME
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS :
ITEM :
110036
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
1
8PCS
2
3
BOLT
(Ø5/16” x 1-3/16" - BLK)
8PCS
8PCS
NOTE:
Quantities shown are for one chair.
SEAT AND BACK
LEFT FRONT LEG
RIGHT FRONT LEG
LEFT BACK LEG
RIGHT BACK LEG
FRONT STRETCHER
BACK STRETCHER
1PC
1PC
1PC
1PC
1PC
1PC
1PC
A
B
C
D
E
F
I
5
ALLEN WRENCH
(6MM - BLK)
1PC
LOCK WASHER
(Ø5/16” - RBW)
FLAT WASHER
(Ø5/16” - RBW)
RIGHT SIDE STRETCHER
1PC
G
LEFT SIDE STRETCHER
1PC
H
LOOSE SEAT CUSHION
1PC
J
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Quantities shown are for one chair.
4
PAN HEAD SCREW
8PCS
(Ø8 x 50MM - RBW)