00775 SERVER. ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.
ITEM : 100775 ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS : 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ITEM : 100775 ASSEMBLY INSTRUCTIONS STEP 2 To remove the shelf,unscrew the shelf from shelf support using Phillips head screw driver (NOT INCLUDED) STEP 3 Adjust the height of shelf support. STEP 4 Align and fasten shelf support to shelf using screw and fully tighten with Phillips head screw driver (NOT INCLUDED) STEP 2 STEP 3 STEP 4 www.coastercompany.
ANTI - TIPPING KIT HARDWARE IDENTIFICATION: PARTS IDENTIFICATION: A SERVER 1PC This tip restraint must be attached to a wall stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the server using short screw provided, through the smaller hole. 1 SHORT SCREW 1PC 2 LONG SCREW 1PC 3 CABLE TIE 1PC 4 L BRACKET 2PCS STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of server.
