00135 BAR TABLE ASSEMBLY INSTRUCTION COASTER FINE FURNITURE Page 1 of 7PAGE 1 OF 6 2013/06/04
ITEM:100135 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately 2.
ASSEMBLY INSTRUCTION ITEM:100135 STEP1 STEP1: Please take out FRONT FRAME(C). STEP2: Attach FLOOR LEVELERS (6) onto LEFT LEG (A) and RIGHT LEG (B). STEP2 Assemble the LEFT LEG (A) and RIGHT LEG (B) onto the FRONT FRAME (C) using ALLEN BOLT - MEDIUM (1). Next, assemble the HANGER BRACKET (D) using ALLEN BOLT - MEDIUM (1). And finally attach the BOTTOM SUPPORT (E) using the ALLEN BOLT - SMALL (2).
ASSEMBLY INSTRUCTION ITEM:100135 STEP3 STEP3: Insert SUCTION CUP(5) into BOTTOM GLASS(H) using BOLT-MEDIUM(1). STEP4 STEP4: Assemble the BOTTOM GLASS SUPPORT(F) using THICKNESS WASHER(4) and BOLT(3).
ASSEMBLY INSTRUCTION ITEM:100135 STEP5 STEP5: Attach TOP GLASS (G) and SHELF GLASS(I) using ALLEN BOLT - MEDIUM (1). Fully tighten all screws.
ASSEMBLY INSTRUCTION ITEM:100135 To attach two pieces together, insert PLASTIC WASHER (10) to the NUT (8) as well as the WASHER (9) and tighten using ALLEN BOLT - LARGE (7).
