MSDS

5. EXPOSURE CONTROL METHODS
Engineering Controls
General ventilation under normal use conditions.
Eye Protection
None under normal use conditions. Wear safety glasses when handling
leaking batteries.
Skin Protection
None under normal use conditions. Use neoprene, rubber or latex gloves
when handling leaking batteries.
Respiratory Protection
None under normal use conditions.
Other
Keep batteries away from small children.
6. HANDLING AND STORAGE
Store at room temperature. Avoid mechanical or electrical abuse. Do not
short or install incorrectly.Batteries may explode, pyrolize or vent if
disassembled, crushed, recharged or exposed to high temperatures.Install
batteries in accordance with equipment instructions. Do not mix battery
systems, such as alkaline and zinc carbon, in the same equipment.
Replace all batteries in equipment at the same time. Do not carry batteries
loose in pocket or bag. Do not remove battery label.
7. WASTE DISPOSAL METHODS
Individual consumers may dispose of spent (used) batteries with
household trash. Nanfu does not recommend that spent batteries be
accumulated (quantities of five gallons or more should be disposed of in a
secure landfill), in accordance with appropriate federal, state and local
regulations. Do not incinerate, since batteries may explode at excessive
temperatures.
8. EMERGENCY PROCEDURES
Steps to be taken if material is released to the environment or spilled in the work area
Notify safety personnel of large spills. Caustic potassium hydroxide may
be released from leaking or ruptured batteries. Avoid eye or skin contact
and inhalation of vapors. Increase ventilation. Clean-up personnel should
wear appropriate protective gear.
Fire and Explosion Hazard
Batteries may burst and release hazardous decomposition products when
exposed to a fire situation. See Sec. 3.
Extinguishing Media
As appropriate for surrounding area.
Firefighting Procedures
Use self-contained breathing apparatus and full protective gear.
FuJian NanPing NanFu Batteries Co.,Ltd