User`s manual

Buoyant Operating Spa System (B.O.S.S) User's Manual

Coast Spas

SPA SETUP MENU

Filter Cycle

You can program two lter cycles per day (cycle 1 and

cycle 2). A lter cycle consists in the activation of all

pumps for one minute, then Pump 1 runs at low speed

for the preprogrammed number of hours. To set the

lter cycles, you must enter two parameters: the start

time and the duration.

• Press Home key for the Device Selection window to show.

• Select Spa to access the spa menu.

• Press Esc/Next key twice to view Spa modes.

• Use Filter to select desired lter cycle to program

(cycle1 or cycle 2).

• Use Cycle to select select the desired parameter to

modify: Start time or Duration, the setting proce-

dure is the same.