Installation Guide
Measurements
Overall Rail length is 4ft/5ft/6ft/6.6ft/7ft/8ft/9ft/10ft.
A
C
D
B
F
E
The gap between each pre-drilled hole is 16”.
Door height is H.
The height of holes on the wall is H+1/”.
G
Minimum distance from the rail hole to the ceiling is 6"(J shape).
Distance from the bottom of the door to the floor is 3/8”.
Distance from door top side to holes on the wall is
1/”.
.
Instructions
It is very important to determine whether you will be installing a Header Board prior to install-
ing the track.
Due to many overlapping factors such as the location of wall studs (Our rail come with
pre-drilled holes every 16” on center), the weight of a barn door and the various types of trim
used in homes, we recommend using a Header Board in all situations.
Please install a 1” x 4” or 1” x 6” Header Board above the door opening directly into studs.
Header Board must be solid wood and measure at least the full length of the track or longer
H+1/”
* Header Board and
Lag Bolts for installing
Header Board are not
included in kit.
A
A
8
A
16”
B
1/”
H+1/”
C
F
⁄”
D
1/”
3/”
16” 16” 16”
H
E
ceiling
G
The following installation steps take a 6.6 ft track as an example. Please refer to the [Number
of Parts in Dierent Track Sizes] for the quantity of accessories for dierent sizes of tracks
Installation Steps: