Installation Guide

Diagonal overlays (D1/D2) are used for decoration by pasting on the suace with double-sided
adhesive.
Remove the protection paper of adhesive on back of D1/D2 and ip D1/D2.
Place the two ends of D1/D2 on the assembled door suace rst. The middle of D1/D2 will
be arched.
Push down the middle of D1/D2 to the suace.The diagonal overlay will stick to the suace sturdy.
Turn the door over, Repeat the former step to install D1/D2 on the other side.
Inse plastic cap (F) into holes on the side of side stile (A) to complete the installation.
4.
5.
5
D2
D1
D1
D2
F
F
*If your door is H-shaped , then your door has already been installed. You can
directly browse the instructions on track installation on the next page.
If your door is K-shaped , please read the following steps to continue the installa -
tion.