Installation Guide

13
Usage Statement:
Use of excessive force when opening, and closing,the door(s) may result in damage to the hardware. Always hold the handle and gently open and close the
door(s).
• Failure to wear proper safety gear (i.e.,eye protection) may result in serious injury or death. Always wear proper safety gear before using power tools.
• Improper operation of power tools may result in loss of control, serious injury or death. Always ensure you have complete control of the power tool
and the work area is free of hazards before operatiog a power tool.
• Lack of secure clamping of the door may result in unexpected movement of the door,loss of power tool control and serious injury or death. Always
securely clamp the door in place before cutting,or drilling, the door.
installation of Anti-jump Disks are required for safe operation of this hardware. installed properly, these discs will keep the door
securely attached to the track.
WARNING
• Mishandling of heavy objects (i.e.,doors) may cause a loss of balance and serious injury. Always be sure you have a secure hold on
the object and are balanced before moving the object.Always wear safety shoes when lifting heavy objects.
• Getting body parts (i.e., hair,fingers) caught in moving parts may cause pinching and serious injury.Do not put fingers in parts that
may move and always remove or contain anything on your body that may become entangled with a moving part.
• Closing sliding doors with your hand on the end of the door may result in your hand, or fingers, getting caught between the door
and other solid objects (i.e., another door, molding) causing serious injury. Always use the door handle to close doors.
CAUTION
We provide 2 types of floor guide for you.
Floor guide is used to keep your door stable and prevent the door bottom swinging back and
forth when you slide it open and closed.
Step-10
b. Roller floor guide (installed on to the
wall), customize the distance according to
the door thickness.
a. T-shape floor guide (installed on the
floor) use router or circular saw to create
a kerf at bottom of the door, along the
center to allow the tip of the T-shape
floor guide to fit in between.
1 / ”
1 / ”