User guide

7 / 13

Flashing iSense Devices Wirelessly User Guide

coalesenses

research to innovate

3. Connecting a gateway node to the PC

Make sure you are using the latest version of iShell.

Start iShell. In case the “Over the air programming” tab is not visible, go to the “Plugins” tab, and

activate the “Over the air programming” plugin by selecting the checkbox on the left.

Connect an iSense device to the PC to act as a gateway between the PC and the devices to be flashed

wirelessly. It must at least consist of

• an iSense Core Module and

• an iSense Gateway Module connected to the PC via a USB cable,

• an iSense Core Module,

• an iSense Gateway Module connected to the PC via a serial cable, and

• an iSense Power Module.

Select the port the device is connected to in iShell. To do so, click on the preferences button (1).