Product Manual

Page 52
16. Battery
The Coag- Sense meter has a factory installed Rechargeable Lithium
Polymer Battery, that charges when the power adapter (provided with the
meter) is plugged into the wall socket. A charged battery (6 hours to fully
charge) can run approximately 200 tests. Please be aware that battery life
may be affected by many factors such as operating conditions (e.g. ambient
temperature), frequency of use, and test duration.
Note: The Battery is not User replaceable.
When the battery is running low the status
bar on the touchscreen of the meter displays
a red indicator in the ‘Battery status’ icon.
The touchscreen displays a ‘Low Battery’
warning. The battery begins charging as
soon as the power adapter is connected to
the power supply.
WARNING: Lithium Polymer batteries may explode
or combust if mishandled. Do not subject the meter to
prolonged exposure to sunlight or place the meter on
or in heating appliances such as microwave,
conventional oven or radiator. Only charge battery
using the power adapter provided along with the
Coag-Sense meter. Use of other power cables may
result in damage to the meter. Do not disassemble or
dispose battery in fire. Do not charge/discharge
battery out of recommended temperature range.