Product Manual

Page 41
11. Performing a Stat Test
A Stat Test allows the user to perform and obtain results of a patient test
without logging in a user account or entering a Patient ID. Stat test results
are saved in the memory of the meter with Patient ID as Stat, along with
patient result it also records the date and time the test was performed.
Note: The memory does not store patient ID or operator ID for any Stat test performed.
Follow the steps below to perform an Stat test:
No.
Action
Image guided instruction
1. 1
Turn the meter ON by
pressing and holding the
(POWER) button on the right
side of the meter.
Note: The message field on the first
screen will display errors encountered
during self-check if any.
2. 2
Press the Stat Test icon.
User is now directed to the
strip lot confirmation screen.
The screen displays the Lot
information of the strip that
was last recorded. Proceed
with testing if the test strip is
from the same lot as
displayed.
Otherwise, scan the NFC
Tag against the NFC Tag
scanner on the meter, the
Lot # (six-digit number) and
Barcode # (eight-digit
number) will auto populate
If NFC Tag information is not
available, you can manually
enter the Lot # and Barcode
# using the keypad on the
touchscreen into the