Product Manual

Page 28
No.
Action
Image guided instruction
2. 2.
Press the Login icon. User
is now directed to enter
login credentials or scan
operator barcode using a
standard barcode scanner.
Note: To configure your meter for Auto
login please contact technical support.
3. 3.
Successful login directs the
user to the Home screen.
Press the Control icon on
display icon.
4. 4.
Select from the following
two options as applicable;
Low Control Test or
High Control Test.
5. 5
Strip lot confirmation
screen displays the Lot
information of the strip that
was last recorded. Proceed
with testing if the control
strip is from the same lot.
Otherwise, press Change
and scan the NFC tag
(located on the bottom right
corner of test strip kit box)
against the NFC Tag
scanner on the meter, the
Lot # (six-digit number) and
Representative example only