Product Manual

Page 14
• Do not pull the strip out while the wheel is spinning. STOP the test,
meter will display “Test Cancelled, Remove Strip’ The strip should
be removed at this time only.
• Store and use the Coag-Sense PT/INR system following the
instructions in this manual.
• This equipment is tested to meet the limits for medical devices,
which are designed to provide a reasonable protection against
harmful interference when the equipment is operated in a clinical or
home environment. If not installed and used in accordance with
these instructions, it may cause harmful interference to other
devices in the vicinity. If this equipment does cause harmful
interference to other devices, which can be determined by turning
the equipment on and off, the user is encouraged to try to correct
the interference by one or more of the following measures:
▪ Reorient or relocate the receiving device.
▪ Increase the separation between the equipment.
▪ Connect the equipment to an outlet on a circuit different from that
to which the other devices are connected.
• Any equipment connected to the data port must be certified to IEC
60601-1. If you connect any equipment that is not recommended by
CoaguSense, you are responsible for meeting the requirements of
this standard.
• In the unlikely event of an electric power surge (i.e., severe static
discharge during a thunderstorm), when using the power adapter,
the display screen may go blank. If this occurs, unplug the power
supply from the back of your meter, wait 5 seconds and plug it back
in. Normal operation should return, but you may have to reset the
time and date.
• DO NOT OPEN THE METER. Do not attempt to repair or modify
this meter. The Coag-Sense meter does not require any periodic
maintenance and there are no user serviceable parts inside. If you
have problems, please contact Technical Support. The Coag-Sense
Prothrombin Time (PT)/INR Monitoring System needs special