Product Manual

Page 4
Meter:
The meter has a TFT color LCD Touch screen that shows results,
information, icons and results recalled from memory. To select an option,
gently click on display button. There are three touch buttons, Cancel or
Previous Screen Button, Home Screen Button and View Button
Screen for the Guided User Interface (GUI) operation. The Power
ON/OFF button is located on the right side of the meter. The NFC (Near
Field Communication) Tag scanner is a built-in scanner that is used to
scan the NFC card containing the strip (Control and Test Strip) data. Strip
Insertion Area guides the test strip into the meter. Micro USB/Power
Adapter port is a micro USB port used to plug to the power adapter.
Multipurpose USB port can be used to connect the meter to a) portable
printer or other Coag-Sense approved accessories. Ethernet Port is used
to connect the Ethernet cable for a wired connection, this port is provided
with a port cover. Reset button (enclosed within the ethernet port
cover) is used to reset the meter in case of software or power-cycle
issues.
The meter performs a self-check when it is first powered ON and every
time a test strip is inserted. If there are any problems detected during self-
check, an error message is displayed on the touchscreen. Refer to the
“Troubleshooting” section of this manual or contact Technical Support for
assistance.
Test Strips:
A test strip is inserted and heated in the meter prior to sample
application. The strip contains a tiny wheel with spokes that pulls the
sample into the reaction well. The spokes quickly and completely mix
the sample with the clot initiating component of the test strip.
The PT time is determined from when the sample is drawn into the
reaction well of the test strip and detected by a beam of light until a clot
forms and interrupts the beam of light. The PT result is converted to an
INR (International Normalized Ratio) using the INR normalization data
communicated by the NFC tag and subsequently stored in the meter.