Product Manual

Page 49
Meter
Display
Possible Cause(s)
Solution
If the message displays
again contact Technical
Support.
DETECT
PROBLEM
There may be a problem with
the strip insertion or with the
motor carriage in the meter.
Take the strip out and
reinsert holding the back
of the instrument steady
with one hand while
inserting the strip
completely with the other
hand. Insert the strip
using a quick smooth
motion.
Try again with another
strip.
If the message persists,
contact Technical
Support.
LIQUID
PROBLEM
There may be a problem with
the strip or with the optical
system of the meter.
Take the strip out and
reinsert holding the back
of the instrument steady
with one hand while
inserting the strip
completely with the other
hand. Insert the strip
using a quick smooth
motion.
Try again with another
strip. If the message
persists, contact Technical
Support.
MOTOR
PROBLEM
There may be a problem with
the motor function of the
meter.
Turn the meter off then
back on. Try again with
another strip. If the
message persists, contact
Technical Support.
HEATER
PROBLEM
The meter is too warm, too
cold, or there may be a
problem with the meter.
Move the meter to a place
that is within the operating
temperature range of the
meter (65ºF to 90ºF, 18ºC