Product Manual

Page 15
CoaguSense, you are responsible for meeting the requirements of
this standard.
• In the unlikely event of an electric power surge (i.e., severe static
discharge during a thunderstorm), when using the power adapter, the
display screen may go blank. If this occurs, unplug the power supply
from the back of your meter, wait 5 seconds and plug it back in.
Normal operation should return, but you may have to reset the time
and date.
• DO NOT OPEN THE METER. Do not attempt to repair or modify this
meter. The Coag-Sense meter does not require any periodic
maintenance and there are no user serviceable parts inside. If you
have problems, please contact Technical Support. The Coag-Sense
Prothrombin Time (PT)/INR Monitoring System needs special
precautions regarding EMC and needs to be put into service
according to the EMC information provided in this manual.”
• “Portable and mobile RF communications equipment can affect The
Coag-Sense Prothrombin Time (PT)/INR Monitoring System.”
• “The use of accessories, transducers and cables other than those
specified by CoaguSense, may result in increased EMISSIONS or
decreased IMMUNITY of the EQUIPMENT.”
• “The Coag-Sense Prothrombin Time (PT)/INR Monitoring System
should not be used adjacent to or stacked with other equipment and
that if adjacent or stacked use is necessary, the Coag-Sense
Prothrombin Time (PT)/INR Monitoring System should be observed
to verify normal operation in the configuration in which it will be used.”
Test Strips/ Control Strips/Control Strip Activating Solution
• The test strips are designed for single use only. Do not reuse the test
strips.
• Patient samples, used strips, transfer tubes and lancets are
potentially infectious. Discard used materials in a puncture resistant,
biohazard waste container using universal precautions.