User Manual
Table Of Contents
11
MAINTENANCE
Calibration
The SAN-10 comes pre-calibrated from the factory. However, the CO2 sensor should be
calibrated at least once a year, or as described in your company’s safety procedures. You
can perform the calibration yourself, or you can return it for factory calibration at a nominal
fee.
Cleaning and Storage
Apply sparingly with a soft cloth and allow drying completely before using. Do not use
soap or Alcohol cleaning. Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning.
© Copyright 2021, CO2Meter, Inc. All Rights Reserved. Last modified June 18, 2021