How-To Guide
Learn How to Use “FUNCTION" Block.
Let us learn how to use “FUNCTION" block.
률細웰
l
By using “FUNCTION" block, you can make a robot do a lot
of
things
with a small number
of
blocks.
“FUNCTION" block does a role
of
memorizing the group
of
command blocks.
Let
us
find out the way to store the group
of
command blocks to “FUNCTION" block.
HowTo
Use
FUNCTION
Block
률뭘웰
l
톨뭘
111
톨헬를
ζ
|
톨헬톨
i
톨웰톨
l
률웰폐
l
Arrange the command blocks as shown
on
the left, attach the “FUNCTION" block at the top
instead
of
“START" block, and press
RUN
button.
You
may see the light flickering three times
on
the left side
of
the “FUNCTION" block.
If the flickering stops
, the storage is completed.
After saving
is
completed, place the “FUNCTION" block under the “START" block as shown
on
the right and press the
RUN
button.
Then commands that were initially placed under the
“FUNCTION" block are executed.
Now let
us
use the “FUNCTION" block to move it back to its destination, and then back it up.
Try it 3)
To
make a movement using “FUNCTION" block
How
do
you
do
to
get
the
robot
to
move
in
the
direction
of
the
arrow
and
then
back
into place?
Let
us
store
the
group
of
blocks
that
goes
to
the
destination in
the
“
FUNCTION"
block
,
and
use
them
again
to
get
the
robot
back
in place.
7