How-To Guide
What are Code-Play blocks?
Code-Play blocks are awesome blocks that can move robots
in
the way
that they are assembled.
Each block has a command to move the robo
t.
80
if you put the blocks
together correctly
, you can make the robot do many different things.
Try making
“Choco" the robot do some things by assembling the blocks as
shown below.
How to Play with the 810cks
This is a brain block. Brain blocks are the heads
or
brains
of
the blocks.
血렐월월뭘뭘뭘렐뭘
The brain block collects the commands
of
the blocks and sends them to the robo
t.
(D@
ψ
〔
디
)
I~
• • •
This is the power button. The green light comes on.
-
CD
If the green light is on, it means that the brain block is ready to work.
When playing with the blocks
, do not press this button.
- æ
CDWhen
the green light
is
blinking, it means that the robot
is
disconnected.
@If the red light is blinking, it means that the battery is low.
• •
This is the RUN button. Pressing this button makes the robot move.
When the green light
is
on
, it means that the brain block is ready to work.
How to Pair the Robot with the 810cks
When the power
of
the brain block is turned on, the first LED
light blinks green.
If
the light is blinking green, it means that it
is not connected to the robo
t.
After turning on the robot’s power, put it to the brain block
closely and wait until the light no longer blinks but stays on.
Once the green light no longer blinks and stays on
, it means
that it is connected to the robo
t.
lr
What is Pairing?
Pairing is the process
of
∞lí1iliBllít!
Ihe
brain block to the robo
t.
2