User manual

32
CNet Global Technology Inc.
www.CNetusa.com
Item
Description
Wireless On/Off
Click Wireless OFF button to turn off wireless RF radio. Click Wireless ON button to turn on wire-
less RF radio.
Antenna Switch
Select Internal antenna or External antenna for using. The default is using Internal antenna.
Wireless Mode
Click to select wireless mode from pull down menu.
Wireless Band
Click to select wireless band from pull down menu.
SSID
It is the wireless network name. The SSID can be 32 bytes long. User can use the default SSID or
change it.
Broadcast Net-
work Name
(SSID)
Enable or disable the SSID broadcast function.
AP Isolation
Wireless network is similar to the virtual local area network. All of the Wireless client devices can
access each other completely. When you enable this function, it will turn off connection between
wireless clients. Only allows connection between wireless client and this AP router.
MBSSID AP
Isolation
Enable this function will turn off connection between clients with different MBSSID. Example: The
client connected with BSSID 1. When enable this function, it will not connect with BSSID 2. Only
can access between clients with SSID 1.
BSSID
Show the MAC address of Wireless interface.
Frequency
(Channel)
Select the wireless communication frequency/channel from pull-down menu.
Operating Mode
Select “Mixed Mode” for 11a/n mode or “Green Field” for 11n mode.
Channel Band-
width
Select the operating channel width 20 MHz or 20/40 MHz.
Guard Interval
Select “Long” or “Auto”. Guard intervals are used to ensure that distinct transmissions do not inte r-
fere with one another. Only effect under Mixed Mode.
MCS
Select 0~7 or “Auto” from pull down menu. The default is “Auto”. Only effect under Mixed Mode.