User manual

26
CNet Global Technology Inc.
www.CNetusa.com
4.3.2 Operation Mode
a. Bridge:
In Bridge mode, all ethernet ports and wireless interfaces are bridged together and NAT function
is disabled. All the WAN related function and firmware all not supported.
b. Gateway:
In Gateway mode, the device is supposed to connect to internet via ADSL/Cable modem. The
NAT is enabled and PCs in LAN ports shard the same IP to ISP through WAN port. The connection type
can be setup in WAN page by using PPPOE, DHCP client, PPTP client, L2TP client or static IP.