User`s guide

CWA-854HT User’s Guide
Table 2-11 Wireless: Security: WPA
LABEL DESCRIPTION
WPA/ WPA2
Cipher Suite
Specify an encryption method to use.
Select TKIP (Temporal Key Integrity Protocol) that
protects against hackers with MIC (Message Integrity Check).
Select AES (Advanced Encryption System) that
encryption.
uses a stronger encryption algorithm and
uses symmetric 128-bit block data
Pre-Shared
Key Format
Specify how you want to enter the keys. Select Hex
with 0x). Select ASCII to enter alphanumerical characters
to enter hexadecimal format (that starts
(a-z, A-Z, 0-9) for the keys.
Pre-Shared
Key
Enter between 8 to 32 characters for the pre-shared key.
All wireless devices in the same wireless network must use the same
pre-shared key.
Apply Changes Click Apply Changes to save the changes. The CW
take effect.
A-854HT will reboot to make the changes
Reset Click Reset to undo the changes.
Help Click Help to display on-line help information in a pop-up screen.
2.8. Wireless: Wireless Access Control
Use the Wireless Access Control to set the CWA-854HT
MAC address. This allows you to restrict wireless access and increase security
to allow or block wireless access based on a computer’s
.
Control to display the configuration screen as shown. Click Wireless > Wireless Access
30