User manual

138
option improves throughput performance. Select the suit Preamble as
Short or Long Preamble.
IAPP
Inter Access Point Protocol. Allow seamless roaming between Access
Points in your wireless network.
Protection
Please select to enable wireless protection or not.
Aggregation
Enable this function will combine several packets to one and transmit
it. It can reduce the problem when mass packets are transmitting.
Short GI
Users can get better wireless transmission efficiency when they enable
this function.
RF Output Power
Users can adjust the RF output power to get the best wireless
connection. Users can choose from 100%, 70%, 50%, 35%, and 15%.
Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
6.2.3 Wireless Site Survey
This function provides users to search existing wireless APs or wireless base stations from ISP. You
can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will appear on SSID column
in Wireless Basic Setup page.
Please click on Refresh to refresh the list. Click Connect after select an existing AP to connect.
6.2.4 Wireless Security Setup
4 encryption types could be selected here, please follow below instructions for the setting.