User manual

135
Broadcast SSID
User may choose to enable Broadcast SSID or not.
Data Rate
Please select the data transmission rate.
Associated Clients
Check the AP connectors and the Wireless connecting status.
Enable MAC Clone (Single
Ethernet Client)
Clone the MAC address for ISP to identify.
Enable Universal Repeater
Mode (Action as AP and
Client simultaneously)
Allow to equip with the wireless way conjunction upper level, provide
the bottom layer user link in wireless and wired way in the meantime.
(Please check Note 1).
SSID of Extended Interface
While linking the upper level device in wireless way, you can set SSID
to give the bottom layer user search.
Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
Note.
1. Enable Universal Repeater Mode (Acting as AP and Client simultaneously)
Allow to equip with the wireless way conjunction upper level, provide the bottom layer user link in
wireless and wired way in the meantime. (The IP that bottom layer obtains is from upper level.)
Ex: When users enable the Universal Repeater to connect to the upper level device, please input
the channel and SSID of the upper level device on router‟s GUI. Click on Apply Changes to save
the settings. (The DHCP in IP config needs to be disabled.)
Users can go to the network Config section and check the information of upper level in Wireless
Repeater Interface Configuration.