User manual

40
Item
Description
Disable Wireless LAN
Interface
Turn off the wireless service.
Band
Please select the frequency. It has 6 options: 2.4 GHz
(B/G/N/B+G/G+N/B+G+N).
Mode
Please select the mode. It has 3 modes to select:(AP, Client, WDS,
AP+WDS).
Multiple APs provides users another 4 different SSID for connection.
Users can add or limit the properties for each connection. Please
check Section 5.2.1.1
SSID
Service Set identifier, the default SSID is CNet, users can define to
any.
Channel Width
Please select the channel width, it has 2 options: 20MHZ, and 40MHZ.
Control Sideband
Enable this function will control your router use lower or upper
channel.
Channel Number
Please select the channel; it has Auto, 1, 2~11 or 13 options.
Broadband SSID
User may choose to enable Broadcast SSID or not.
Data Rate
Please select the data transmission rate.
Associate Clients
Check the AP connectors and the Wireless connecting status.
Enable MAC Clone (Single
Ethernet Client)
Clone the MAC address for ISP to identify.
Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)
Allow to equip with the wireless way conjunction upper level, provide
the bottom layer user link in wireless and wired way in the meantime.
(The IP that bottom layer obtains is from upper level.) Please check
Section 5.2.1.2
SSID of Extended Interface
While linking the upper level device in wireless way, you can set SSID
to give the bottom layer user search.
Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.