User manual

35
4.1.2 LAN Interface Setup
This page is used to configure the parameters for local area network that connects to the LAN ports of
your router. Here you may change the setting for IP address, subnet mask, DHCP, etc.
Item
Description
IP Address
The default IP address is 192.168.1.1
Subnet Mask
Please enter the Subnet Mask address
Default Gateway
Please enter the Default Gateway address for LAN interface.
DHCP
Click to select Disabled, Client or Server in different operation mode
of LAN access point.
DHCP Client Range
Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP
address from the range
Static DHCP
Configures how static DHCP address are assigned to client (only
available when DHCP server is enabled)
Device Name
Configures the device name of the router.
802.1d Spanning Tree
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN. Select
enable or disable the IEEE 802.1d Spanning Tree function from