User manual

33
don‟t know, please check with your ISP.
User Name
Input the PPTP Account supplied by ISP, for example.
If you don‟t know, please check with your ISP.
Password
Input the Password supplied by ISP.
MTU
MTU stands for Maximum Transmission Unit. For
PPPoE connection, the default MTU should be
provided by computer operating systems
(OS). Advanced users can set the MTU manually for
increasing the internet performance. The largest
number allowed is 1460 byte
Request MPPPE Encryption
Microsoft Point-to-Point Encryption (MPPE)
encrypts data in Point-to-Point Protocol (PPP)-based
dial-up connections or Point-to-Point Tunneling
Protocol (PPTP) virtual private network (VPN)
connections. 128-bit key (strong), 56-bit key, and
40-bit key (standard) MPPE encryption schemes are
supported. MPPE provides data security for the PPTP
connection that is between the VPN client and the
VPN server.
DNS
If ISP provides you DNS information, please select
Attain DNS automatically, otherwise select Set DNS
Manually and input the DNS information into the
blank.
Clone MAC Address
Copy the MAC address from the device you had
registered to your ISP if your ISP asks for the specific
MAC Address.
Enable IGMP Proxy
The Internet Group Management Protocol (IGMP) is
a communications protocol used to manage the
membership of Internet Protocol multicast groups.
IGMP is used by IP hosts and adjacent multicast
routers to establish multicast group memberships. You
can choose to enable IGMP Proxy to provide service.
Enable Ping Access on WAN
Select Enable Ping Access on WAN, will make WAN
IP address response to any ping request from Internet