User manual

30
Service Name
Input the service name supplied by ISP.
Connection Type
It has three types: Continuous, Connect on
Demand, and Manual.
Idle Time
It is the time of inactivity before disconnecting
your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for
which the Internet connect is maintained during
inactivity. If the connection is inactive for longer
than the defined Idle Time, then the connection
will be dropped. Either set this to zero or enable
Auto-reconnect to disable this feature.
MTU Size
MTU stands for Maximum Transmission Unit. For
PPPoE connection, the default MTU should be
provided by computer operating systems
(OS). Advanced users can set the MTU
manually for increasing the internet performance.
The largest number allowed by Ethernet at the
network layer is 1492 byte
DNS
If ISP provides you DNS information, please
select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS
information into the blank.
Clone MAC Address
Copy the MAC address from the device you had
registered to your ISP if your ISP asks for the
specific MAC Address.
Enable IGMP Proxy
The Internet Group Management Protocol
(IGMP) is a communications protocol used to
manage the membership of Internet Protocol
multicast groups. IGMP is used by IP hosts and
adjacent multicast routers to establish multicast
group memberships. You can choose to enable
IGMP Proxy to provide service.
Enable Ping Access on WAN
Select Enable Ping Access on WAN, will make
WAN IP address response to any ping request
from Internet users. It is a common way for