User manual

Chapter

Installing the Modem

Installing the Modem 3-1

This chapter contains detailed instructions on how to install and

configure the modem, as well as how to verify if your installation is

correct. We recommend that you follow the steps accordingly to avoid

future problems.

3.1 ESD Precautions

Electrostatic discharge (ESD) can damage your processor, disk drives,

expansion boards, and other system components. Always observe the

following precautions before you install any system component.

1. Do not remove a component from its protective packaging until you

are ready to install it.

2. Wear a wrist grounding strap and attach it to a metal part of the

system unit before handling components. If a wrist strap is not

available, maintain contact with the system unit throughout any

procedure requiring ESD protection.

3.2 Setting up the Modem

This external modem is easy to install. Just follow the instructions

below.

To install the modem:

1. Make sure that your system is turned off before you install the

modem.