Specifications

External Paging
DS2000 Hardware Manual Section 4: Optional Equipment ◆ 4-3
4
Programming the Relay for External Paging Control
● In 0201 - CPRU Relay, to assign the CPU Relay for External Paging control, enter 2.
● In 0201 - CPRU Relay Page Zone Assignment, enter the Page Zone (1-7) that should activate the CPU
relay. Note that Zone 1 and All Call Paging announcements broadcast from the External Paging output.
Additional Programming
● To adjust the External Paging ring volume:
- In 0202 - Page Ring Volume, adjust the volume of ringing over External Paging (5=low, 6=medium,
4=high).
● To enable Background Music over External Paging:
- In 0201 - Background Music, enter Y (9) to enable Background Music system-wide.
- Make sure your music source is connected (see Music Source on page 4-4 for more).
- In 0202 - Background Music Over External Page, enter Y (9).
● To enable extension ringing over External Paging:
- In 0202 - External Page Ring Source, enter 3 (Extension).
- In 0202 - Extension, enter the number of the extension that will ring over External Paging.
● To enable trunk ringing over External Paging:
- In 0202 - External Page Ring Source, enter 8 (Trunk).
- In 0203 - UNA Ringing Option, specify the type of External Paging ringing for each trunk
(0=None, 1=Ring always, 2=Ring at night only, 3=Delay ring).
Refer to Paging in the DS1000/2000 Software Manual (P/N 80000SWG**) for more on these features.